Storage
28
Prepare the regulator for end-of-season storage by running RV antifreeze through the system. This will
keep internal parts lubricated, protect against corrosion, and keep the unit from freezing.
CAUTION
The regulator may be damaged if it freezes.
Protect the regulator from freezing during storage by following the instructions below.
Preparing for storage:
1. Add antifreeze
Pour RV antifreeze into the pump system.
Note: RV antifreeze is non-toxic and biodegradable and generally safer for
the environment than automotive antifreeze.
2. Spray briefly
Turn on the pump and run the pump system briefly until fluid sprays.
Removing from storage:
1. Drain
Drain the antifreeze left in the pump system into a suitable container.
2. Flush with
water
Fill the pump system with fresh water and run through the system. Operate
the pump system until the system is completely flushed. Be sure to set up
containers to capture the antifreeze flush water.
3. Disposal
Dispose of the antifreeze and flush water properly.