North America Traffic PTL 2.4 Series, Руководство пользователя

Страница: 46 / 64

45 S
ECTION
9
9.3
O G 2
The Gen 2 and Gen 3 share similar software structures when it comes to unit ID’s and work zone layouts.
Refer to the chart below for further detail when setting up the Gen 2 secondary units.
Note: The numbered boxes indicate the assigned phase (i.e. 1 = phase 1, 2 = phase 2)
*Gen 2 unit ID’s of SEC6 and SEC7 will require the software version V28. Previous program versions only
have SEC ID’s up to SEC5.
SITE LAYOUT Pri S1 S2 S3 S4 S5 S6* S7*
ONE-WAY ZONE 1 2
ONE-WAY 1 SIDE 1 2 3
ONE-WAY 2 SIDE 1 2 3 4
ONE-WAY 3 SIDE 1 2 3 4 5
ONE-WAY 4 SIDE 1 2 3 4 5 6
ONE-WAY 5 SIDE 1 2 3 4 5 6 7
ONE-WAY 6 SIDE 1 2 3 4 5 6 7 8
ONE-WAY 1 CROSS ROAD 1 2 3 3
ONE-WAY 1 CROSS 1 SIDE 1 2 3 3 4
ONE-WAY 1 CROSS 2 SIDE 1 2 3 3 4 5
ONE-WAY 2 CROSS ROADS 1 2 3 3 4 4
ONE-WAY 2 CROSS 1 SIDE 1 2 3 3 4 4 5
ONE-WAY 2 CROSS 2 SIDE 1 2 3 3 4 4 5 6
TWO-WAY ZONE (MANUAL MODE) 1 1
TWO-WAY 1 SIDE ROAD 1 1 2
TWO-WAY 1 CROSS ROAD 1 1 2 2
TWO-WAY 2 SIDE ROADS 1 1 2 3
TWO-WAY 2 CROSS ROADS 1 1 2 2 3 3
TWO-WAY 3 SIDE 1 1 2 3 4
TWO-WAY 4 SIDE 1 1 2 3 4 5
GEN 3 SETUP GEN 2 Secondary Unit ID's