Nortel TDM Recorder, Руководство по установке

Страница: 72 / 128

Setting up the System Standard 3.0
72 Nortel TDM Recorder
3 Click Accept to save the configuration.
4 When prompted, restart the e-Recorder Capture Engine by clicking the
Services shortcut on your desktop and choosing
ERecorder > Restart . If
you do not have a shortcut, you can also choose Start > Control Panel
> Administrative Tools > Services .
5 If you have other cards to set up, repeat this procedure for each one.
Note: Nortel Contact Recording supports Voice Activated VOX mode
only for the M2250 attendant console. It does not support D-channel or
CCE control. If setting up Contact Recording for the M2250 consoles, be
sure to set Vox to ON and Start on Tap and Stop on Tap to ALWAYS.
CTI/Unify Tagging
Only (or No Unify
Scripting At All)
with Tap Sense
Always Enabled for
Start/Stop
Recording VOX, audio
voice energy only Vox Enabled =
Checked Start on Tap = Always
Stop on Tap = Always
ISDN D-
Channel, Robbed
Bit CAS bits,
Digital Extension
Tap Events or
Line Voltage Vox Enabled =
Unchecked
Record Method
Tap Sense
Mode
Card Setting Channel Setting