manualshive.com logo in svg

Nortel Observe, Руководство пользователя

Поделиться
Скачать
Nortel Observe Скачать руководство пользователя страница 88

Nortel Proprietary

Each file name will be displayed as its being converted. To turn off this extra 
logging, from the shell, type: 

wavConvDebugOff <CR>

.

7. The prompt conversion may take up to 20 minutes to complete, at which point 

the following message will appear on the terminal:

“mirosConvertWavDir: dir conversion complete”

 

8. Once installation is complete, the /C:/TUI/CUSTOM directory will contain the 

pre-recorded prompts in the correct format and the initial wav files will have 
been erased from the card. To verify this, do the following:

a. From the shell, type 

ll “/C:/TUI/CUSTOM”

.

The drive should contain the new prompts in .mcf file format.

b. From the shell, type 

ll “/C:/TUI/WAV”

.

The directory where the professionally recorded wav files were 
originally stored should now be empty.

9. Re-enable the card from overlay 32 of the switch.

The custom TUI prompts are enabled via the Browser User Interface (BUI). See 

language configuration

 on page 48 for TUI language selection.

Local TUI Prompt Recording

The administrator has the ability to locally record a set of custom prompts using 
the TUI. 

Notes: 
1. Any prompts locally recorded will over-write any prompts previously 
stored in the custom language directory on the card. Before editing the custom 
TUI prompts, ensure that a backup of the prompts are kept at an external 
location. See Backup of Custom TUI Prompts on page 89.
2. The full list of custom TUI prompts must be recorded before Nortel Remote 
Agent Observe will allow the use of the Custom TUI language.

The following procedure highlights the steps to edit the Custom TUI prompts.

1. Before editing the custom TUI prompts, have a copy of the TUI prompt list 

at hand (see section 12.3:”TUI Prompt List”). This is required to have 
knowledge of the prompt number associated with each prompt.

2. Log into the TUI using the Administrator user ID/ password combination.
3. Press ‘2’ to edit the custom TUI prompts.
4. A message is played to advise the administrator to enter the first prompt 

they wish to edit. The administrator then enters the prompt number 
associated with the prompt they desire to edit (see section 12.3:”TUI
Prompt List”). 

Planning, Installation and Administration Guide

88

Содержание Observe
















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды