manualshive.com logo in svg

Nortel Observe, Руководство пользователя

Поделиться
Скачать
Nortel Observe Скачать руководство пользователя страница 123

Nortel Proprietary

10.2 XA Firmware Upgrade 

There are three recommended methods for upgrading XA firmware.
1. XA firmware upgrade from an external FTP Server.
2. XA firmware upgrade using PCMCIA Card to transfer loadware to Compact 

Flash Card.

3. XA firmware upgrade using FTP to transfer loadware to Compact Flash Card.

Note: XA Upgrades to the card require access to the VxWorks shell on the 
bootROM load.  This is available either via a telnet connection or via serial access 
to COM1.  For bootROM load shell access, the default username is “itgadmin” and 
the default password is “itgadmin”.

XA Upgrade from an external FTP Server

1. The XA firmware is placed on an FTP server.  
2. Reboot the card and boot into the bootROM load. To enter the bootROM load, 

reboot the card and when the card is rebooting, the user will be prompted to 
enter “jkl” to gain access to the bootROM.

Note: The LAN cable must be connected into the other port on the L-
Adapter for the network interface on the bootROM load to work correctly.

3. The upgrade is then performed using the following command:

upgradeXa “<server IP address>”, “<userid>”, “<password>”, 
“<path>”, “<filename>” <CR>

The <userid> and <password> are those of the FTP server and the <path> is the 
path to the file on the FTP Server.

4. When the upgrade function is complete, reboot the card.

XA Upgrade using PCMCIA Card to transfer firmware to Compact Flash 
Card.

1. Reboot the card and boot into the bootROM load. To enter the bootROM load, 

reboot the card and when the card is rebooting, the user will be prompted to 
enter “jkl” to gain access to the bootROM.

2. Insert PCMCIA Card into the faceplate PCMCIA Card slot.
3. Copy loadware from the PCMCIA card (“/A:/” drive) onto the compact flash 

card (“/C:/” drive) as shown below:

copy(“/A:/filename”,”/C:/filename”)

4. Remove PCMCIA Card from the faceplate slot.

Planning, Installation and Administration Guide

123

Содержание Observe
















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды