manualshive.com logo in svg

Nortel Observe, Руководство пользователя

Поделиться
Скачать
Nortel Observe Скачать руководство пользователя страница 49

Nortel Proprietary

Figure 14  Non-SCCS Configuration Page

Note: The difference between the SCCS and the non-SCCS Configuration 
pages is the presence of the Multicast settings.

Installing the keycode

Once the keycode string is typed in and the “Modify” button is clicked, the Card 
information is updated. The keycode encodes the number of simultaneous observes 
that can occur on the system. The browser will report a successful keycode install 
or if the keycode has been rejected.

Notes
1. The card must be reset (either through the faceplate or through the reset 
option on the BUI) for the Nortel Remote Agent Observe keycode install to 
complete.
2. If configuring a Nortel Remote Agent Observe card for observing on an 
SCCS system, it may speed up the install process if the multicast settings are 
configured before the card reset for the keycode install is done.  This will save 
the administrator doing a separate reset for the multicast settings.

SCCS Call Centre Observation Configuration

Nortel Remote Agent Observe must be set up to parse the RSM stream from the 
SCCS server. The SCCS Call Centre Tick-Box should be ticked.  The Multicast IP 

Planning, Installation and Administration Guide

49

Содержание Observe
















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды