Nortel INM 5.0, Руководство пользователя

Страница: 37 / 60

Administration of Network Wide Backup & Restore 3-17
Network Wide Backup & Restore User Guide 450-3101-031 Rel 1.0 Standard June 1999
NTP Update Issue 1 July 1999
3
Procedure 3-6
Using the One Time Backup option
Use this procedure to add, edit, or delete a one time backup of a controller.
Note: You cannot schedule a backup if a backup is in progress. The state
of the controller must be idle to schedule a backup.
Refer to Figure 3-5, The One Time Backup tab on page 3-19.
Requirements
Before you start, you must
• be at the Network Wide Backup & Restore window
• select the One Time Backup tab
• have admin privileges
Action
Step Action
1 Determine your action.
2 Highlight the controller, in the Controller List, for which you want to edit a one
time backup.
Go to step 4.
3 Highlight the controller, in the Controller List, for which you want to delete a
one time backup.
Click on Clear.
Click on Save.
4 Determine the fields you want to edit.
—continued—
If you want to Then go to
add a one time backup step 5
edit a one time backup step 2
delete a one time backup step 3
If you want to edit the Then go to
start date of the one time backup step 5
start time of the one time backup step 6
transfer rate of the one time backup step 7
storage location of the backup step 8