Nortel INM 5.0, Руководство пользователя

Страница: 23 / 60

Administration of Network Wide Backup & Restore 3-3
Network Wide Backup & Restore User Guide 450-3101-031 Rel 1.0 Standard June 1999
3
Procedure 3-1
Using the Controller List window
Use this procedure to use the Controller List of the user interface.
You can do the following:
• filter the list
• sort the list
The contents of all tabs in the user interface are a static snapshot of the status
at the instant that the view was created, as shown in the Controller list. Select
the Refresh key to update the view.
Requirements
Before you start, you must be at the Network Wide Backup & Restore window.
Action
Step Action
1 Determine your action.
2 Select any combination of the boxes in the Controller List:
• All - the system will display all the controllers
• OPC - the system will display only the OPC controllers
• NPC - the system will display only the NPC controllers
• EC-1 - the system will display only the EC-1 controllers
• Other
—continued—
If you want to Then go to
filter the Controller List step 2
sort the Controller List step 3
refresh the screen information step 4