Nortel BayStack 600 Series, Руководство пользователя

Страница: 65 / 178

Switch settings for printed circuit packs 2-58
August 2006 08.01 NTP 297-3601-316
For Generic 602.20
Note: Generally, an RS-232 DCE device can be identified by its female DB-25
connector and an RS-232 DTE device by its male DB-25 connector.
Note 1: Settings: 1 = ON, 0 = OFF, - = NOT APPLICABLE.
Note 2: Device numbers 0 and 1 are preassigned to the NT3T71 TTY ports.
Therefore, they cannot be used for the NT3T80. Device numbers 16 and 17 are
not assignable because the NT3T71 ports are also preassigned to other devices.
Therefore, they also cannot be used for the NT3T80.
XU4
XU1 1
2 Used when the NT3T80BA connects to a 20-mA current loop.
Note:
This function is not supported when
the NT3T45CA, or higher, paddleboard is
provisioned.
Table 2-BE:
NT3T80BA/BB Dual Serial Data Interface pack - switch settings for tty assignment
Device Number S6 Address Switches
1
2 3 4 5
2-3 0 0 0 0 1
4-5 0 0 0 1 0
6-7 0 0 0 1 1
8-9 0 0 1 0 0
10-11 0 0 1 0 1
12-13 0 0 1 1 0
14-15 0 0 1 1 1
18-19 0 1 0 0 1
20-21 0 1 0 1 0
22-23 0 1 0 1 1
24-25 0 1 1 0 0
26-27 0 1 1 0 1
28-29 0 1 1 1 0
30-31 0 1 1 1 1
Table 2-BD:
NT3T80BA/BB Program socket selection
Socket
location Port Connecting device