Multi Variable Heat Pump Floor and Ceiling Type Indoor Unit
7
(6) Adjust the height of the unit to make the drain pipe slope slightly downward so that the drainage will
become much smoother as shown in Fig. 4.1.2.3.
Floor type
Fig.4.1.2.2
Ceiling type
Fig.4.1.2.3
4.1.3 Leveling
The water level test must be done after installing the indoor unit to make sure the unit is level, as shown
below.
Note:
Adjust the height of the unit to make the drain pipe slope slightly downward so that the drainage will be
smooth.
