manualshive.com logo in svg

Nortec NHPC, Руководство инженера

Поделиться
Скачать
Nortec NHPC Скачать руководство пользователя страница 79

10-20

Page 71
2008-10-01

(b) Examine roughing-in for piping systems to verify actual locations of piping 

connections before humidifier installation.

(c) Proceed with installation only after unsatisfactory conditions have been corrected.

(2) Installation

(a) Install humidifiers and steam dispersion panels per manufacturers’ instructions.

(b) Seal humidifier dispersion-tube duct penetrations with flange.

(c) Install with required clearance for service and maintenance.

(3) Commissioning

(a) System verification testing is part of the commissioning process. Verification 

testing shall be performed by the contractor and witnessed and documented by the 
commissioning authority. Refer to section 01810, Commissioning, for system 
verification tests and commissioning requirements; or

(b) Manufacturer's Field Service: Engage a factory-authorized service representative 

to inspect field-assembled components and equipment installation, including 
piping and electrical connections. Report results in writing. Responsibilities 
include:

1

Leak Test: After installation, charge system and test for leaks. Repair leaks 
and retest until no leaks exist.

2

Operational Test: After electrical circuitry has been energized, start units to 
confirm proper unit operation. Remove malfunctioning units, replace with new 
units, and retest. 

3

Test and adjust controls and safeties. Replace damaged and malfunctioning 
controls and equipment.

(4) Testing

(a) System testing is accomplished through either of the following methods:

1

System verification testing is part of the commissioning process. Verification 
testing shall be performed by the contractor and witnessed and documented 
by the commissioning authority. Refer to section 01810, Commissioning, for 
system verification tests and commissioning requirements; or

2

Manufacturer’s Field Service: Engage a factory-authorized service 
representative to inspect field-assembled components and equipment 
installation, including piping and electrical connections. Report results in 
writing. Responsibilities include:

a

Leak Test: After installation, charge system and test for leaks. Repair 
leaks and retest until no leaks exist.

b

Operational Test: After electrical circuitry has been energized, start units 
to confirm proper unit operation. Remove malfunctioning units, replace 
with new units, and retest.

c

Test and adjust controls and safeties. Replace damaged and 
malfunctioning controls and equipment.

(5) Training

(a) Equipment training can be accomplished in one of the following two ways:

Содержание NHPC






























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды