Nortec MES2, Инструкция по установке и эксплуатации

Страница: 9 / 54

Introduction | 6
Options and Accessories
An enclosed plumbing option is available for each MES2 cabinet size. The option consists of a
fixed cabinet with an easily removable door for servicing. Figure 5 shows the enclosed
plumbing option installed on a 10 lb/hr MES2 ATT CE.
Figure 5: Enclosed Plumbing Option
Nortec also provides a complete line of options and accessories for every humidification
application. The following table lists some of the most common accessories available for use
with the MES2 humidifier. Refer to the installation instructions that come with the accessories
for their proper installation and operation.
Table 2: Options and Accessories
Option / Accessory Used For
Modbus Interface Controlling humidifier operation via Modbus (See Modbus Wiring
on page 21 and Modbus Configuration on page 27).
Enclosed Plumbing See above.
Steam Distributors Adding steam into air ducts.
On/Off or Modulating Control Humidistats Controlling the output of the humidifier based on sensed RH.
Air Proving Switch Insuring humidification only occurs when air is moving in a duct.
Steam Hose Connecting humidifier to steam distributor.
Condensate Hose Collecting and draining condensate that collects in steam
distributors and steam distribution lines.
Capacity Part No.
10 lb/hr (4.5 kg/hr)
15, 20 lb/hr (6.8, 9.1 kg/hr)
25, 30 lb/hr (11.4, 13.6 kg/hr)
Enclosed Plumbing Part Numbers
5 lb/hr (2.3 kg/hr)
2554073
2554074
2554075
2554076