Nortec MES2, Инструкция по установке и эксплуатации

Страница: 40 / 54

37 | Maintenance and Servicing
MES2 Maintenance Checklist
Model #: _________________
Serial #: _________________ Tag: ________
Cylinder #:
CHECK CYLINDER

Cylinder spent), yellow LED flashing 4 times in sequence.

(If Yellow LED is On and cylinder is not new then cylinder will have to be replaced soon.)
REPLACE CYLINDER

Cylinder drained.


Disconnect open, On/Off/Drain switch off, water shut off valve closed, cover removed.


Cylinder removed


Drain valve removed / cleaned / new O-Ring installed


Drain valve cleaned / installed / ground wire attached.


New Cylinder Installed

New cylinder model #
(Should be same as removed cylinder)

Cylinder plug colors match cylinder dots.


Cylinder plugs snug and in good condition.


High Water Sensor plug snug and in good condition.


Steam hose attached.


Cover replaced, water shut off valve open, On/Off /Drain switch On, Disconnect Closed

SYSTEM CHECK

Yellow Led flashing? No

Yes

Flash Sequence?
(See Troubleshooting Chapter for actions if yellow LED is flashing
)

Primary power disconnect turned off


Cylinder plugs snug and in good condition.


Electrical wiring not loose and in good condition,


Steam hoses and steam lines in good condition / No kinks in hose,


No Signs of water leaking around humidifier, steam line, condensate returns,


Cover replaced, water shut off valve open, On/Off /Drain switch On, Disconnect Closed

Inspected by: Date of inspection: _______/_______/______
Company: