Nordson ProBlue P10, Руководство пользователя по изделию

Страница: 64 / 319

+
Saving current settings
+
Restoring saved settings
Installation
3-34
Part 1024496_06 2014 Nordson Corporation
Save and Restore Melter Settings
The current value of all editable operating parameters and the set‐point
temperature of each component can be saved and, if necessary, restored at
a later time. When saved settings are restored, they overwrite the settings
that are presently in use.
This save‐restore feature is useful in instances where the settings that are in
use are deliberately or accidentally changed and you need to return the
melter to its pre‐change setup.
To save current settings
With the melter in the automatic scan mode, simultaneously press the
number
1 key and the Setup key.
S‐1 appears momentarily in the right display.
To restore saved settings
CAUTION! All melter settings will be deleted! Before restoring saved
settings, ensure that use of the restored settings will not disrupt the current
process or create an unsafe operating condition.
With the melter in the automatic scan mode, simultaneously press the
number
2 key and the Setup key.
S‐2 appears momentarily in the right display.
If you use the restore feature before the
save feature is used for the very first
time, the factory default set‐point
temperatures will be restored. This will
cause the hoses and guns to stop
heating.
You can transfer melter settings from
one melter to another using the
Nordson Configuration Manager
software utility.
Refer to Appendix C,
Melter Communications