Nordson FoamMix Flex, Руководство пользователя по изделию

Страница: 89 / 106

FoamMix Flex Foaming System
83
Part 1129048_01
E
2020 Nordson Corporation
FoamMix Flex Foaming Station
System Alarm Alarm Message Alarm Category Corrective Action
FoamMix Flex Alarms
Gas Pressure Delta
Warning Warning
S
Check the nitrogen
gas tank pressure
S
Check the adhesive
input pressure.
Gas Pressure Low Fault Fault Check the nitrogen gas
tank pressure as the
tank could be empty.
Mixer Motor Enable
Switch is OFF Fault Place the Mixer Enable
switch (located on the
controller door) into the
ON (1) position.
Mixer Motor is Not in
Automatic Mode Fault On the SureFoam
Configuration page,
place the mixer into
Auto mode.
Sealant Input Pressure
Low Fault Fault Verify the operation of
the PID loop and the
states of the Bulk
Unloader bulk melters.
Verify PID parameters.
Sealant Input Pressure
High Fault Fault Possible PID tuning
issue.
Mixer Pressure High
Fault Fault Compare the Mixer
Pressure to the Sealant
Input Pressure. If they
are similar, look for PID
loop issues. If they are
not similar, verify the
operation of the
transducer.