Nordson FoamMix Flex, Руководство пользователя по изделию

Страница: 53 / 106

FoamMix Flex Foaming System
47
Part 1129048_01
E
2020 Nordson Corporation
Gas Flowmeter Configuration Screen
Touch the Configure Gas Flowmeter arrow button on the Flowmeters
Configuration screen to access options that let you view or change the
configuration of the gas flowmeter.
1
3
2
4
Status
MOTOR RUNNING
MIXER
U1 U2
VDK
M
Gas
Flowmeter
Config.
Feedback Alarm:
####
#.###%
Sealant
Flowmeter
Config.
Zero
Gas Flowmeter
##%
NNN.N
NNN.N
NNN.N
NNN.N
Gas Flowmeter
End Range
Advanced
FoamMix
Version:
DV1
Setpoint:
Minimum Gas Flow:
Flow (cc/min):
Flow Low Limit
(cc/min):
Raw Analog Input
Flow Zero Offset
cc/min
Status must read “System
Ready” to zero flowmeter
Figure 22 Gas Flowmeter Configuration screen
Item Component Function
1 Zero Gas Flowmeter Touch the arrow button to zero the gas
flowmeter if the system is in
Ready status.
2 Gas Flowmeter End
Range View or change the maximum range of
the gas flowmeter.
3
Raw Analog
Input/Flow Zero
Offset View or change the values of the raw
analog input and zero offset for the gas
flowmeter.
4
Minimum Gas Flow View or change the minimum gas flow
options. If the mixer is running, the gas
valve allows this minimum flow even if
the VDK pump is stopped.
NOTE: An alarm is generated if the
actual flow falls below the minimum flow
setpoint.