Nordson FoamMix Flex, Руководство пользователя по изделию

Страница: 23 / 106

FoamMix Flex Foaming System
17
Part 1129048_01
E
2020 Nordson Corporation
The systems may not be used to process the following materials:
S
Explosive and flammable materials
S
Erosive and corrosive materials
S
Food products.
Do not use the platen:
S
As a press
S
To lift loads
Nitrogen Pressure Regulator (Optional Equipment)
A Nordson supplied nitrogen pressure regulator (P/Ns: 1082050 [high] and
1082051 [low]) is provided with the foaming system. The Nordson‐supplied
regulator must be used to ensure correct operation of the FoamMix Flex
foaming system.
Customer Supplied Equipment
The following Nordson equipment that makes up the FoamMix Flex foaming
system needs to be purchased separately:
S
FoamMix Flex foaming station
S
ProMeter VDK dispensing module
S
ProMeter VDK controller
S
Bulk melter/unloader
S
Nitrogen tank (high or low pressure)
NOTE: The gas bottle fitting provided on the input of the pressure
regulator supplied by Nordson Corporation may not fit your gas bottle. In
this case, the fitting and nipple on the input of the gas regulator may need
to be changed to adapt to your gas bottle. The input port of the regulator
uses a 1/4
‐
NPT thread.
S
A 3/4‐inch high pressure hose between the Bulk Unloader and the
advanced foaming system (various Nordson Corporation part numbers)
S
A 3/4‐inch high pressure hose between the FoamMix Flex foaming
system and ProMeter VDK dispensing module
S
Rated power cable