Nordson DuraBlue D10L, Руководство пользователя по изделию

Страница: 29 / 164

Installation
3-3
Part 1032059B
E
2003 Nordson Corporation
Manual 41-DURABLUE-MA-02
Installation Requirements
Before installing the melter, ensure that the desired installation location
provides the required clearances, environmental conditions, and utilities.
Clearances
Figure 3-1 illustrates the minimum clearances that are required between the
melter and surrounding objects. Table 3-1 describes each clearance.
Figure 3-1 Minimum installation clearances
Table 3-1 Minimum Installation Clearances
Item Description
Required Clearance
Item Description
D10L
D16L
D4L
A
Width of melter at the outside of the mounting
brackets. 441 mm
(17.36 in.) 334 mm
(13.14 in.)
B
Clearance required between the melter and
the nearest object in order to remove the
filter.
203 mm
(8.00 in.) 203 mm
(8.00 in.)
C
Clearance required between the front end of
the melter (control panel) and the nearest
object in order to fully open the electrical
enclosure door
330 mm
(13.00 in.) 279 mm
(11.00 in.)
D
Minimum horizontal space required for the
melter when both the electrical enclosure
door and tank lid are fully opened.
1126 mm
(44.34 in.) 908 mm
(35.73 in.)
E
Minimum vertical space required for the
melter when the tank lid is at its highest point. 861 mm
(33.90 in.) 623 mm
(24.54 in.)