Nordson DuraBlue D10L, Руководство пользователя по изделию

Страница: 151 / 164

Operating Parameters
B-5
Part 1032059B
E
2003 Nordson Corporation
Manual 41-DURABLUE-MA-02
21 Over Temperature Delta
Description: The number of degrees that the temperature of any component can
increase over its assigned set-point temperature before an over
temperature fault (F3) will occur.
Value: 5
_
C (10
_
F) to 60
_
C (110
_
F)
Resolution:
1
_
C
1
_
F
Default Value: 15
_
C (25
_
F)
Format: —
Use: —
22 Under Temperature Delta
Description: The number of degrees that the temperature of any component can
decrease from its set-point temperature before an under temperature
fault (F2) occurs.
Value: 5
_
C (10
_
F) to 60
_
C (110
_
F)
Resolution:
1
_
C
1
_
F
Default Value: 25
_
C (50
_
F)
Format: —
Use: —
23 Standby Delta
Description: The number of degrees by which all heated components will be
decreased when the applicator is placed into the standby mode.
Value: 25
_
C to 190
_
C (50
_
F to 350
_
F)
Resolution:
1
_
C
1
_
F
Default Value: 50
_
C (100
_
F)
Format: —
Use: A standby delta should selected that results in a balance between melter
energy savings during periods of inactivity, the amount of time and
energy required to bring the melter back up to set-point temperature, and
a temperature at which the hot melt can be held in the tank for extended
periods of time without charring. Refer to Section 4, Operation, Using
Melter Function Keys.
NOTE: The standby delta does not affect the under temperature delta
(parameter 22).