Nordson DuraBlue D10L, Руководство пользователя по изделию

Страница: 73 / 164

Maintenance
5-1
Part 1032059B
E
2003 Nordson Corporation
Manual 41-DURABLUE-MA-02
Section 5
Maintenance
WARNING: Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
Table 5-1 describes the preventive maintenance tasks required to keep
DuraBlue melters operating within their specified limits and to prevent
equipment malfunctions. For information about maintaining optional
equipment that was supplied by Nordson, refer to the instructions provided
with the equipment.
If the melter stops operating or is operating incorrectly, refer to Section 6,
Troubleshooting, for information about diagnosing common problems and
performing corrective maintenance.
Table 5-1 Preventive Maintenance Tasks
Task Frequency Reference
Relieving system pressure Before performing any maintenance task
that requires opening a hydraulic
connection or port Relieving System Pressure
Cleaning the exterior of the melter, hoses,
and guns Daily Cleaning the Melter
Replacing the filter
NOTE: Some DuraBlue melters do not
have a filter.
S
As needed
S
When changing the type or grade of
hot melt
Replacing the Filter
Instruction sheet provided with
replacement filter
Cleaning the tank
S
When changing the type or grade of
hot melt
S
When excessive charring occurs
Cleaning the Tank