7
2. Identify the Left Upright (73) and the Right
Upright (74).
Have a second person hold the Right Upright (74)
near the Right Base Cover (77).
See the inset
drawing.
Locate the wire tie in the rectangular
hole in the bottom of the Right Upright. Tie the
wire tie securely around the end of the Upright
Wire Harness (75). Pull the other end of the wire
tie until the Upright Wire Harness is routed com-
pletely through the Right Upright.
Gently pull up on the Upright Wire Harness (75)
as you set the Right Upright (74) on the Base
(83) inside the Right Base Cover (77).
Be care-
ful not to pinch the Upright Wire Harness.
Attach the Right Upright (74) to the Base (83)
with two Upright Bolts (72) and two Upright Star
Washers (90);
do not tighten the Upright Bolts
yet.
Note: If necessary, tip the upper end of the
Right Upright forward slightly as you thread the
Upright Bolts into the Right Upright.
Attach the Left Upright (73) to the Base (83) with
two Upright Bolts and two Upright Star Washers
(not shown);
do not tighten the Upright Bolts
yet.
With the help of a second person, lower the
treadmill off the cardboard stand.
83
75
Wire
Tie
77
2
74
73
90
72
3. Identify the Right Upright Sleeve (96) and the
Left Upright Sleeve (95), which are labeled.
Slide the Right Upright Sleeve onto the Right
Upright (74). Slide the Left Upright Sleeve onto
the Left Upright (73).
95
“Right”
“Left”
96
3
74
73
75
74
Wire Tie