If the speed or incline setting is too high or too low
at any time during the workout, you can override
the setting by pressing the speed or incline but-
tons;
however, when the next segment begins,
the treadmill will automatically adjust to the
speed and incline settings for the next
segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton. The walking belt will begin to move at 1 mph.
When the next segment of the workout begins, the
treadmill will automatically adjust to the speed and
incline settings for the next segment.
5. Select a display mode and monitor your
progress with the display and the intensity
level bar.
When a preset workout is selected, the console of-
fers three display modes. Press the Display button
repeatedly to select the desired display mode.
If
the first or second display mode is selected,
a
profile of the speed settings of the workout will ap-
pear in the display.
If the third display mode is
selected,
the display will show an animation of a
runner.
6. Measure your heart rate if desired.
See step 7 on page 16.
7. Turn on the fan if desired.
See step 8 on page 16.
8. When you are finished exercising, remove the
key from the console.
See step 9 on page 16.
18
