9
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver in connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC NOTICE
1. Use only the power cord and connector cables supplied by Nordic ID
to connect the equipment.
2. Use only shi elded cables to connect I/O devices to this equipment.
3. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
2.5.2 FCC Class B Part 15 and WRAP
The radiated output power of the WRAP is far below the FCC radio frequency
exposure limits. Nevertheless, the WRAP should be used in such a manner that
the potential for human contact during normal operation is minimized.
2.6 IC related information
This device complies with Part 15 of the FCC Rules and with RSS-210 of
Industry Canada.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
2.7 Warranty
Nordic ID grants warranty to its products according to the Nordic ID General
Sales Conditions.
Warranty will be void, should the Nordic ID products be used in ways in
contradiction with the instructions laid out in this User’s Manual, or should the
products’ housing be opened or tampered with.
