16
5 Getting Started
5.1 Unpacking the unit
Nordic ID products are packaged in carton boxes (boxes include the Nordic ID
logo and colors). The standard package includes typically the RF650 Hand
Terminal, rechargeable batteries (2 pcs), Desk Top Charger, the power supply
for the charger with power cord and the connector cable for the Hand Terminal.
The WRAP is packaged separately. The package contains the WRAP and the
power supply together with the power cord.
Please check the equipment upon arrival. Check that the boxes are intact and
contain no visibly damaged parts. If you note any parts, which seem damaged,
please contact your local Nordic ID Sales Representative or Nordic ID
Technical Support.
5.2 Charging the batteries
Before using the RF650 Hand Terminal you must place the rechargeable
batteries into the Hand Terminal battery compartment. Open the battery case
cover in the back of the Hand Terminal and place the batteries in the battery
holder. Place the batteries according to the polarity indicators in the holder.
When charging the batteries from fully discharged status, the charging process
takes approximately 2,5 hours.
Charging alkaline batteries in the charger may damage the charger as well as
the batteries.
5.3 Activating the Hand Terminal
The Hand Terminal does not have a separate power switch (ON/OFF). With
adequately charged batteries, the Hand Terminal is always ready to function by
pressing any key. The Hand Terminal will resume its standby state 90 seconds
after the last user function (key press).
The Start up screen asks for a 4 digit PIN-code. The default factory setting of
the PIN-code is 1234.
