23
Depending on the application, the HOST can send fields to the Hand
Terminal. These fields may be filled using the keyboard or the Laser Scanner
(or RFID reader). Fields are typically underlined.
5.14 Locked fields
Fields can generally be filled with text using the keyboard. An exception to
this is caused by locked fields. When a locked field is active, the cursor is the
same length as the field. A locked field cannot be read by the Laser Scanner
(or by the RFID reader) either. A locked field functions like a button the
content of which can be sent to the HOST by pressing OK.
5.15 Filling fields using the laser scanner
1. A field can be defined to be filled using the Laser Scanner (or RFID
reader) and sent to the HOST.
2. A field can be defined to be filled using the Laser Scanner (or RFID
reader) but not to be sent to the HOST.
3. A field can be defined not to be filled using the Laser Scanner (or RFID
reader).
NOTE! If a field already contains text, it will be replaced by the new text.
5.16 Writing text in a field
An active field is indicated by the cursor. An active field can be filled with text
using the keyboard and/or using the Laser Scanner (or RFID reader).
You can move the cursor in the field step by step using the arrow keys if
SHIFTLOCK is ON.
5.17 Writing letters
Letters can be written in a field when the SHIFTLOCK is ON by pressing the
number keys containing letters. When a key is pressed once, the first
indicated letter will appear. When pressed twice the second letter will be
shown, and so on.
CAPITAL or small letters can be changed by pressing a key for at least 1.2
seconds.
5.18 Removing letters
