22
Other Bluetooth devices apart from WRAP
(such as mobile phones) may
also appear on the list. The WRAP can be recognized by the name, which the
system administrator has set for it. If there are no WRAPs listed when the text
”NO MORE BS” appears on the display, restart the search process by
selecting [SEARCH]. Select a WRAP, which has the same PIN-code as the
Hand Terminal, from the list and press OK. After selecting the WRAP the
Hand Terminal will form a connection to the WRAP.
After the Hand Terminal has succeeded in connecting with the WRAP the
Hand Terminal will receive the Bluetooth addresses of all the Base Stations
that are connected to the network (have the same PIN-code). The Bluetooth
addresses will be saved in the memory of the Hand Terminal. When the
connection to the network has been successfully performed, the Hand
Terminal will beep three times quickly in succession, after which it will beep
separate beeps one each for a found WRAPs (e.g. five WRAPs found, five
beeps).
The Hand Terminal is now ready to communicate with the host system. The
host system may have a function, which allows only Hand Terminals with a
certain
CommID
to use the system. The system administrator has to see to it
that CommIDs of all new Hand Terminals to be used in the system are saved
in the host system.
CommID
is a unique identification number for the Hand Terminal. By using
the CommID, the Host System is able to separate the Hand Terminals from
each other. CommID is printed on the ID label located under the rechargeable
batteries of the Hand Terminal but may also be checked from the internal
menu (INFO).
5.13 Input fields
The RF650 Hand Terminal has a virtual display page of 12 x 20 characters.
The actual display size is 8 x 20 characters, thus 2/3 of the virtual page can
be viewed at a time.
