nord NORDAC START Series, Руководство пользователя

Страница: 95 / 120

5 Parameter
BU 0135 en-4118 95
5.2.6 Information
P700 Current operating status RD
Display range 0.0 … 25.4
Arrays [-01] = Current error
Current active error message (not acknowledged)
[-02] = Current warning
Current existing warning
[-03] = Reason for switch-on
block
Current existing reason for an active switch-on block
Description Display of current messages about operating status
Display values

Section 6 "Operating status messages"
P707 Software version RD
Display range 0.0 … 9999.0
Arrays [-01] = Software version
Version number (e.g.: V1.0)
[-02] = Software revision
Revision number (e.g.: R1)
[-03] = Special version Special version of the hardware/software (e.g: 0.0). The value "0"
stands for "Standard Version".
Description Display of software version (firmware version) of device
P708 Status of digital in. RD
Display range 0000 0000 … 0111 1111
(bin)
0000 … 007F
(hex)
Description Display of switching status of the digital inputs
Display values
Value (Bit) Meaning
0 Digital input 1
Switching status of digital input 1
1 Switch input 2
Switching status of digital input 2
2 PTC resistor input
PTC resistor input switching status
3 Bus In Bit 0
Bus In signal status In bit 0 (SK 175E-… only)
4 Bus In Bit 1
Bus In signal status In bit 1 (SK 175E-… only)
5 Bus In Bit 2
Bus In signal status In bit 2 (SK 175E-… only)
6 Bus In Bit 3
Bus In signal status In bit 3 (SK 175E-… only)
P709 Potentiometer status RD
Display range 0.0 … 100.0 %
Arrays [-01] = Potentiometer P1
Current value in % of 9.5 A (BG1) or 23,5 A (BG2)
[-02] = Potentiometer P2
Current value in % of 25.6 s
[-03] = Potentiometer P3
Current value in % of 100% start voltage
[-04] = Potentiometer P4
Current value in % of 25.6 s
Description Display of set values of potentiometer P1 … P4 , in relation to the respective scale end
values (in %)
P711 Digital output status RD
Display range 0000 … 0111
(bin)
00 … 07
(hex)
Description Display of switching status of the digital inputs
Display values
Value (Bit) Meaning
0 Dig.1/Bus. bit 0
Switching status of digital output 1 or Bus Out Bit 1 1)
1 Dig.2/Bus. bit 1
Switching status of digital output 2 or Bus Out Bit 2 1)
2 Mechanical b.
Switching status of mechanical brake output
1) Bus Out Bit only for devices SK 175E-….
The display for DOUT and Bus Out are "or"-ed when doing this.