manualshive.com logo in svg

Nonin PalmSAT 2500A VET, Руководство оператора

Поделиться
Скачать
Nonin PalmSAT 2500A VET Скачать руководство пользователя страница 28

22

Care and Maintenance

Care and Maintenance

Wipe the device with a soft cloth dampened with a mild detergent or 10% bleach solution. Do not 
use undiluted bleach or any cleaning solution other than those recommended here, as permanent 
damage could result. Dry with a soft cloth, or allow to air dry. 

Clean after each use or as needed. 

Clean the device separately from the sensors. For instructions on cleaning pulse oximeter sensors, 
refer to the respective sensor instructions for use.

The Oxitest

Plus7

 by Datrend Systems, Inc. can be used to verify operation of the pulse oximeter.

CAUTION: 

Do not place the Model 2500A VET in liquid or clean it with agents 

containing ammonium chloride, isopropyl alcohol, or products that are not listed in 
this operator’s manual.

CAUTION: 

Do not autoclave or immerse the device or sensors in liquid. Do not 

expose the device or components to excessive moisture or liquids. 

CAUTION: 

Do not use caustic or abrasive cleaning agents on the device or the 

sensors.

!

!

!

Содержание PalmSAT 2500A VET















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды