11
Introduction
Installing Batteries
1. Press the battery cover latch (figure 2), and slide off the battery cover from the bottom of the
unit.
2. Insert 4 new AA-size alkaline batteries or a rechargeable NiMH battery pack. Be sure to insert
the batteries in the correct position, as indicated by the polarity markings (+ and -) inside the
battery compartment (figure 3).
3. Replace the battery cover and turn on the device. If the unit does not turn on, see
“Troubleshooting.”
Figure 2: Model 2500A VET - Rear View
Figure 3: Installing Batteries
WARNING: Before changing the batteries, make sure the device is off and the sensor
is not applied to the animal.
CAUTION:
Replace batteries within 30 seconds to avoid losing settings (date, time,
and data stored in memory) or corrupting data.
!
5822-600-07
UL 60601-1
US PATENT # Re. 33,643
PULSE OXIMETER
MODEL 2500A VET
PLYMOUTH, MN USA
NONIN MEDICAL, INC.
4 X 1.5V AA
IEC LR6
CL
ASSIFIED
US
C
UL
IP32
30EM
See Accompanying
Documents
VETERINARY
USE ONLY
Battery Cover
Latch
Battery
Cover
Battery
Orientation
AA-size Alkaline
Batteries
Battery Pack
