manualshive.com logo in svg

Nonin Avant 9700, Руководство оператора

Поделиться
Скачать
Nonin Avant 9700 Скачать руководство пользователя страница 34

28

Care and Maintenance

Care and Maintenance

The Avant 9700 requires no calibration or periodic maintenance other than battery replacement. 
The device’s expected service life is 5 years.

Do not attempt to open the case or repair the electronics. Opening the case will damage the 
device and void the warranty. If the device is not functioning properly, see “Troubleshooting.”

The Oxitest

Plus7

 by Datrend Systems, Inc. can be used to verify operation of the pulse oximeter.

Cleaning the Model 9700

Clean the Avant 9700 with a soft cloth dampened with a mild detergent or a 10% bleach/90% 
water solution (household bleach [containing less than 10% sodium hypochlorite]). Do not pour 
or spray any liquids onto the device, and do not allow any liquid to enter any openings in the 
device. Allow the device to dry thoroughly before reusing it.

Refer to the pulse oximeter sensor Instructions for Use for cleaning information.

CAUTION: 

Do not autoclave or immerse this device in liquid or use caustic or 

abrasive cleaning agents.

!

Содержание Avant 9700
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды