13
Operating the Avant 9700
Operator Functions
Basic Functions
The Avant 9700 basic functions are described in the table below.
Table 3: Basic Functions
Function
Button
Instruction
Turns device on and
off
Using the ON/STANDBY button:
•
Press
once (turns the device on)
•
Hold
1 second (turns the device off)
•
Hold
5 seconds (turns the device off when in
Patient Security mode)
Battery capacity
Briefly
press
the ON/STANDBY button while the
device is on to display battery capacity.
View or set alarms,
volumes, time/date,
and other
parameters.
Press
the Settings button to enter the menu.
(There are two screens within the menu. The
Settings button advances the operator to the
second screen.)
• The Left and Right Control buttons advance
through limits on each screen.
• The Plus and Minus buttons adjust the
highlighted limits up and down.
Change the LCD
display screen.
Press
the LCD Screens button to advance
through Plethysmographic Waveform, Trend
Waveform, and Trend Histogram views.
Adjust the display
intensity
(brightness).
Press
the Plus or Minus button with the device in
Plethysmographic Waveform view to change
display intensity. Display intensity can also be
adjusted by
pressing
the Settings button and
advancing to the Display Brightness icon.
NOTE:
When option switch 6 is in the DOWN
position, display intensity will automatically be
reduced when converting from AC to battery power.
Print-on-Demand
Press
the ON/STANDBY button while the device
is on.
or
then
or
then
or
