Nokia M11 T66220, Руководство пользователя

Страница: 99 / 169

Nokia M11 User’s Manual
E
Copyright Nokia Networks Oy C33833001SE_00 5-44
D
Issuing commands without changing nodes
You can issue a complete Config command from anywhere in the
hierarchy without changing your current node.
M11 (ip ip-ppp)>> set system diag high
M11 (ip ip-ppp)>>
Here, the diagnostic level is set high in the system without jumping
to the node first.
Displaying current settings
You can use the
show
command to display the current Root settings of
your M11. When you are in Config mode, you use the
show
command
to display the current Config settings. If you enter the
show
command
at the top level of the Config hierarchy, the command line interface
displays the settings for all enabled functions in the M11. If you issue
the
show
command at an intermediate node, you see all settings for that
node and its subnodes.
Stepping through M11 configuration
The Nokia M11 command line interface includes a step mode to
automate the process of entering configuration settings. When you use
the Config step mode, the CLI prompts you for all required and
optional information. You can enter the configuration values
appropriate for your site without having to enter complete CLI
commands.
When you are in step mode, the CLI prompts you to enter required and
optional settings. If a setting has a default value or a current setting, the
command line interface displays the default value for the command in
parentheses. If a command has a limited number of acceptable values,
those values are presented in brackets, with each value separated by a
vertical line. For example, the following CLI step command indicates
that the default value is off and that valid entries are limited to on and
off.
option (off) [on|off]: on
You can accept the default value for a field by pressing the Enter key.
To use a different value, type it in and press Enter.
You can enter the Config step mode by typing
set
from the top node of
the Config hierarchy. You can enter step mode for a particular node by
typing
set node_name
. For example: