background image

Nokia M11 User’s Manual

 

E

 Copyright Nokia Networks Oy

C33833001SE_00

 5-76

Command

Set M11 as DHCP relay agent

Description

Configures M11 as a DHCP relay agent which relays
the DHCP requests to an external DHCP server

Syntax

set dhcp option relay-agent server-address [ip_ad-
dress]

Arguments

server-address

 argument specifies the IP address

of the external DHCP server.

Example

M11> set dhcp option relay-agent server-
address 192.3.2.1

Domain Name System settings

Domain Name System (DNS) is an information service for TCP/IP
networks that uses a hierarchical naming system to identify network
domains and the hosts associated with them. You can identify one
primary DNS server and one secondary server.

Command

Set domain name

Description

Specifies the default domain name for your network.
When an application needs to resolve a host name, it
appends the default domain name to the host name
and asks the DNS server if it has an address for the
“fully qualified host name”.

Syntax

set dns domain-name [domain_name]

Arguments

domain_name

 is the default domain name for your sys-

tem.

Example

M11> set dns domain-name nokia.com

Command

Set IP address of primary name server

Description

Specifies the IP address of the primary DNS name
server.

Syntax

set dns primary-address [ip_address]

Arguments

ip_address

 is the IP address of your primary name

server.

Example

M11> set dns primary-address 10.98.16.250

Содержание M11 T66220










































































































































































Отзывы: