Nokia M11 T66220, Руководство пользователя

Страница: 37 / 169

Nokia M11 User’s Manual
E
Copyright Nokia Networks Oy C33833001SE_00 4-10
Step 3: Configure M11
In configurations given here, we assume that the unit uses its default
configurations and the changes are done on top of the default
configuration of the M11 version T66220.01.
The Nokia M11 command line interface includes a step mode to
automate the process of entering configuration settings. When you use
the Config step mode, the CLI prompts you for all required and
optional information. You can enter the configuration values
appropriate for your site without having to enter complete CLI
commands.
To enter the Config step, mode type
set
from the top node of the
Config hierarchy. See Chapter 5 section Stepping through M11
configuration for more information on the step mode.
When you are in step mode, the CLI prompts you to enter the required
and optional settings. If a setting has a default value or a current
setting, the command line interface displays the default value for the
command in parentheses. If a command has a limited number of
acceptable values, those values are presented in brackets, with each
value separated by a vertical line. For example, the following CLI step
command indicates that the default value is off and that valid entries
are limited to on and off.
option (off) [on|off]: on <Enter>
You can accept the default value for a field by pressing the
ENTER
key.
To use a different value, type it in and press
ENTER
.
In the following example the values changed by the user are in bold
type. The default values have been accepted by pressing
ENTER
.
M11> config
Config Mode v1.0
(admin level privileges –– read/write)
M11 (top)>>set
Stepping set mode (press Control–X <Return/Enter> to
exit)...
system
name (”M11”): <Enter>
Diagnostic Level List
low
medium
high