Nokia M11 T66220, Руководство пользователя

Страница: 143 / 169

Nokia M11 User’s Manual
E
Copyright Nokia Networks Oy C33833001SE_00 5-88
Pinhole settings
Pinhole settings are used to configure static entries to NAPT table. The
pinhole function allows access to servers, such as Web-HTTP servers,
from outside your local LAN in cases where NAPT/address mapping
is enabled. The settings affect the whole system.
Note
If you have a Web server on LAN, make sure that it has a different port
number than M11’s integral Web server. You can change the M11’s
Web server port through the integral server settings.
Command Configure pinhole
Description Configures pinhole.
Syntax set pinhole name [name] protocol-select [tcp | udp |
icmp | pptp] external-port-start [port_number] external-
port-end [port_number] internal-ip [ip_address] internal-
port [port_number]
Arguments The
name
argument defines the unique pinhole entry
name.
The
protocol-select
argument specifies the proto-
col.
The
external-port-start
specifies the start of the
external port range.
The
external-port-end
specifies the end of the ex-
ternal port range. Together the external port arguments
define the available range of allowed external ports.
The
internal-ip
argument specifies the IP address
of the server located in LAN and the
internal-port
argument its port. Valid values for
port_number
are 0
– 65535.
Example
m11> set pinhole name web-server proto-
col-select tcp external-port-start 80 ex-
ternal-port-end 80 internal-ip
192.168.1.180 internal-port 80