Nokia M11 T66220, Руководство пользователя

Страница: 125 / 169

Nokia M11 User’s Manual
E
Copyright Nokia Networks Oy C33833001SE_00 5-70
You can configure as many as 16 static IP routes for a Nokia M11. Use
the following commands to maintain static routes to the Nokia M11
routing table:
Command Add a static route
Description Adds a static route to the routing table.
Syntax set ip static-routes destination-network [net_address]
netmask [netmask] interface [ip-address|ppp-vccx]
gateway-address [gate_address] metric [integer]
Arguments Type a destination network address in the
net_ad-
dress
argument in dotted decimal notation. The
net_address
argument cannot be 0.0.0.0.
netmask
is the subnet mask of the destination net-
work. The subnet mask associated with the destination
network must represent the same network class (A, B,
or C) or a lower class (such as a class C subnet mask
for a class B network number) to be valid.
ip-address|ppp-vccx
argument indicates whether
the static route can be reached directly through the
gateway IP address or through any active PPP channel
(
ppp-vccx
, where x = 1 ... 8).
gate_address
identifies the default gateway IP ad-
dress. The gateway address is not needed if
ppp-
vccx
is selected as the gateway interface.
The default metric is 1. Type a number from 1 to 16 for
the
integer
argument to indicate the number of
routers (actual or best guess) a packet must traverse to
reach the remote network. You can type a metric of 1 to
indicate either: The remote network is one router away
and the static route is the best way to reach it; The re-
mote network is more than one router away but the
static route should not be replaced by a dynamic route,
even if the dynamic route is more efficient. Metric 16
indicates that the route is disabled.
Example
M11> set ip static-routes destination-
network 192.111.122.0 netmask
255.255.255.0 ip-address gateway-address
192.111.1.1 metric 3