Nokia M11 T66220, Руководство пользователя

Страница: 77 / 169

Nokia M11 User’s Manual
E
Copyright Nokia Networks Oy C33833001SE_00 5-22
5.2 Command line interface
The Nokia M11 operating software includes a command line interface
(CLI) that lets you monitor and configure your M11 over a telnet or a
local serial console connection. You can use the CLI to enter and
update configuration settings in M11, monitor its performance, and
restart it. Some CLI commands are not available until certain
conditions are met. For example, you must turn a function on before
you can enter settings for that function.
The commands of the CLI are divided into two hierarchies: Root and
Config. The Root command hierarchy lets you monitor the
performance of your M11, display and reset M11 statistics, and issue
administrative commands to restart M11 functions. The Config
command hierarchy lets you configure the settings of your M11.
5.2.1 Starting and ending a CLI session
You can open a command line interface session by opening a telnet
connection from a workstation on your network to an M11 Ethernet or
ADSL port or by connecting a terminal to the console port on Nokia
M11.
Connecting with telnet
You initiate a telnet connection by issuing the following command
from an IP host that supports telnet (or a personal computer running a
telnet application such as Microsoft or NCSA Telnet).
telnet ADSL_ip_address
You must know the IP address of your Nokia M11 before you can
connect to it via a telnet connection to it. You can use the command line
interface to configure the IP address of your M11.
Connecting through console port
You can connect a terminal or a terminal emulator to the console port
on the Nokia M11 front panel to configure, administer, and monitor
your Nokia M11. To use the Nokia M11 console, you need a special
cable (E64320.01) and either a terminal or a terminal emulator (such as
a personal computer with a terminal emulation application that
supports 9600-baud communication).