Nokia M11 T66220, Руководство пользователя

Страница: 113 / 169

Nokia M11 User’s Manual
E
Copyright Nokia Networks Oy C33833001SE_00 5-58
Command Set peer IP address
Description Specifies the IP address of the peer on the other end of
the logical ATM link using ppp-vcmux encapsulation.
Syntax set ip ip-ppp {vccx} peer-address [ip_address]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8). If there is only one ATM channel using ppp-
vcmux encapsulation, you can leave the argument
vccx
out. If you specify an IP address other than
0.0.0.0, your Nokia M11 will not negotiate the remote
peer’s IP address. If the remote peer does not accept
the address in the
ip_address
argument as its IP ad-
dress (typically because it has been configured with
another IP address), the link will not come up. The de-
fault value for the
ip_address
argument is 0.0.0.0,
which indicates that the WAN port will accept the IP ad-
dress returned by the remote peer. If you enter 0.0.0.0,
the peer system must be configured to supply this ad-
dress.
Example
M11> set ip ip-ppp vcc2 peer-address
0.0.0.0
Command Enable/disable address mapping on ATM link using
PPP-vcmux encapsulation
Description Specifies whether you want M11 to use NAPT on the
specified ATM link using ppp-vcmux encapsulation
when communicating with remote routers. Address
mapping lets you conceal details of your network from
remote routers, which is useful when connecting to an
Internet Service Provider. By default, the address map-
ping is turned on.
Syntax set ip ip-ppp {vccx} addr-mapping [on|off]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8). The second argument enables/disables ad-
dress mapping on that channel.
Example
M11> set ip ip-ppp vcc2 addr-mapping on