background image

OPERATION

2

TrailBlazer

 Series (11–01)

Carefully unpack and inspect your new vacuum for
shipping damage. Each unit is tested and thoroughly
inspected before shipping. For instructions regarding
any shipping damage, contact Nobles immediately. All
returns must have a Return Authorization Number
(RAN).

This manual is furnished with each new unit. It
provides necessary operation and maintenance
instructions and an illustrated parts list.

Read this manual completely and understand the
machine before operating or servicing it.

Use the Parts Lists to order parts.  Before ordering
parts or supplies, be sure to have your machine model
number and serial number handy. Parts and supplies
may be ordered by phone or mail from any authorized
parts and service center, distributor or from any of the
manufacturer’s subsidiaries.

This machine will provide excellent service. However,
the best results will be obtained at minimum costs if:

The machine is operated with reasonable care.

The machine is maintained regularly - per the
machine care instructions provided.

The machine is maintained with manufacturer
supplied or equivalent parts.

This machine is intended for commercial use only. It is
suited to pick up dirt, dry debris and dust in an indoor
environment and is not constructed for any other use.
The pick up of any type of fluid or dangerous dust is
prohibited. Use only recommended accessories.

MACHINE DATA

Please fill out at time of installation for future reference.

Model No.-

Install. Date -

Serial No.-

 

2001 Tennant Company              Printed in U.S.A.

Nobles is a registered United States trademark of Tennant Company.

TrailBlazer is a United States trademark of Tennant Company.

Содержание TrailBlazer 613017























Отзывы: