![background image](http://html.mh-extra.com/html/nobles/trailblazer-613017/trailblazer-613017_operator-and-parts-manual_1698266009.webp)
OPERATION
TrailBlazer
Series (11–01)
9
FIG. 16
At the beginning of each shift, the filters should be
checked. Empty or replace as necessary.
NOTE: Never use a Micro filter without the cloth filter.
4.
Push the hose into the cap opening .
5.
Twist the aluminum wand into the hose. Check
hose cuffs at both ends to make sure that they are
tight.
6.
Loosen the shoulder straps and waist belt. In an
open area, lift the vacuum by one shoulder strap
and slide your free arm into the other strap
(Figure 17).
FIG. 17
7.
Fasten the waist belt snugly and make sure the
weight is resting comfortably on your hips
(Figure 18).
FIG. 18
WARNING: To reduce the risk of fire, electric
shock or injury, do not pull or carry the vacuum
by the cord or use the cord as a handle. Do not
close door on cord or pull the cord around sharp
edges or corners. Do not run over the cord. Keep
the cord away from heated surfaces. Do not pull
on the cord to unplug. Grasp the plug at the outlet
and pull. Work within cord length to avoid stress
and damage.
8.
Check the wear on the cord by the vacuum body
and at the plug. Place the extension cord between
the waist belt’s strap and padded area to signal
you if you have run out of cord while vacuuming
(Figure 19).
FIG. 19
9.
To attach tools to a 1
½
” aluminum wand, LOOSEN
the plastic nut at the end of the wand, insert the
tool, and retighten the nut. To ensure the copper
ring stays in place, NEVER remove the nut.
ELECTRICAL CORD CARE
NEVER stretch the cord tightly between the vacuum
and the outlet. A cord that is stretched or pulled will
not function properly and creates a danger.
After vacuuming, unplug the cord (at both ends of an
extension cord) and wind it up loosely. DO NOT wind
the cord up by wrapping it around your hand and
elbow.
WARNING: To reduce the risk of fire, electric
shock or injury, do not pull on the cord to unplug.
Grasp the plug at the outlet and pull. Work within
cord length to avoid stress and damage. Do not
handle the plug or vacuum with wet hands.