OPERATION
10
TrailBlazer
Series (11–01)
PROPER STORAGE
When the vacuum is not in use, it should be stored in
a dry place.
WARNING: To reduce the risk of fire, electric
shock or injury, empty the filter bag after every
use and before storage. Some types of dust and
debris may combust.
PROPER VACUUMING MOTION FOR
LARGE AREAS WITH DIRECT SUCTION
TOOLS
1. Begin with the wand parallel to your body.
2. Draw the top of the wand in toward your waist and
twist at the waist walking backward or forward
(a side–to–side motion) (Figure 20).
FIG. 20
3.
The motion is similar to mopping and keeps the
upper body and arms from tiring.
WARNING: DO NOT use machine to pick up
flammable or combustible materials or anything
that is burning or smoking, such as cigarettes,
matches, or hot ashes.
ERGONOMICS
The weight of the vacuum should be carried on the
operator’s hips and be evenly distributed.
The padded waist belt or waist and shoulder straps
are adjustable for a custom fit.
The backpack vacuums have a ventilated backplate
to keep the operator cool.
The on/off switch is conveniently placed for easy
access on the waist belt of the TrailBlazer and on
the left side of the Trailblazer Lite body.
Use the proper attachments for the job. Pro–Team has
attachments to perform most jobs without requiring
that the operator bend over or get into difficult
positions.
CARING FOR YOUR VACUUM
WARNING: To reduce the risk of fire, electric
shock or injury unplug unit from wall outlet when
not in use and before servicing.
1.
Every time you finish vacuuming, shake out the
cloth and Micro filters.
2.
Each week, rinse, dry and return the foam/filter
diffuser to the bottom of the TrailBlazer below the
motor.
3.
After each shift, wipe the inside and outside of the
vacuum with a household cleaning agent.
PREVENTATIVE MAINTENANCE
ATTENTION: The following information is for use
by qualified service personnel only and is to
provide guidance for troubleshooting and
maintenance.
WARNING: To reduce the risk of fire, electric
shock or injury unplug unit from wall outlet when
not in use and before servicing.
UNPLUG the vacuum when working on the motor or
any electrical part.
CHECK the condition of all electrical cords before
each use.
Have a qualified service person at an authorized
Nobles Service Dealer CHECK the carbon brushes
on the motor every six months and replace any
brush worn down to
½
” in length.
DO NOT lubricate the motor; it is equipped with
sealed bearings.
