OPERATION
TrailBlazer
Series (11–01)
5
GROUNDING INSTRUCTIONS
The vacuum Must be grounded. If the vacuum should
malfunction or stop working, grounding provides a
path of least resistance for electrical current, thereby
reducing the risk of electrical shock. This unit is
equipped with a cord that has an
equipment–grounding conductor and grounding plug.
The plug must be inserted in an appropriate outlet that
is properly installed and grounded in accordance with
all local codes and ordinances. Cutting off the ground
wire or using a cord that is not equipped with a ground
plug will void the warranty on the unit, and Nobles will
accept NO liability associated with the unit.
Improper connection of the equipment–grounding
connector conductor can result in a risk of electrical
shock. Check with a qualified electrician or service
person if you doubt that the outlet is properly
grounded. Do not modify the plug provided with the
vacuum. If it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
Grounded
3 Hole Outlet
Ground Pin
(120V)
PREPARING THE VACUUM FOR
OPERATION
TRAILBLAZER
MODEL
1.
Remove the top cap and pull out the cloth filter.
Check to see that the dome filter has not shifted
during shipping (Figure 1).
FIG. 1
2.
Install a Micro filter inside of the cloth filter. At the
beginning of each shift, the filters should be
checked. Empty or replace as necessary.
NOTE: Never use a Micro filter without the cloth filter.
3.
Replace the cap. Push the hose into the cap
opening (Figure 2).
FIG. 2
