28
SS300 Service Information (3-2017)
MAINTENANCE
AFTER EVERY 50 HOURS OF USE
1.
Remove the solution tank filter and clean screen
(Fig. 100). Turn the filter bowl counter-clockwise
to remove. Make sure to drain solution tank before
removing filter.
Fig. 100
2. Cylindrical brushes - Rotate brushes from front
to rear (Fig. 101). Replace brushes when they no
longer clean effectively.
Fig. 101
3. Cylindrical scrub head - Remove debris buildup
from underside of scrub head (Fig. 102).
Fig. 102
4. Inspect and clean the seal on the recovery tank lid
(Figure 104). Replace seal if damaged.
Fig. 103
AFTER EVERY 100 HOURS OF USE
If machine is equipped with the optional battery water-
ing system, check the watering hoses and connec-
tions for damage and wear (Figure 105). Replace
system if damaged.
FOR SAFETY: When servicing batteries, wear
personal protection equipment as needed. Avoid
contact with battery acid.
Fig. 104
