Use and Maintenance Manual model “H14 V SHAPE”
34
ENGLISH
14 PHASES OVERVIEW
PHASE
DESCRIPTION
-The resistor preheating phase
starts and pellet begins to fall into the
brazier.
- Pellet ignites by means of the
incoming hot air passing through
the conduit of
the glowing resistor.
- A further pellet load help develop
the flame
.
The appliance has carried out the
ignition phase and reaches the
working power as per settings.
The desired room temperature has
been reached.
The set maximum boiler-water tem-
perature has been reached.
The brazier cleaning phase is active
without the cleaner being moved
(periodic function).
The active brazier cleaning phase is
on. The appliance will shutdown and
restart automatically.
Restart is required after cooling.
Once such condition is achieved, the
appliance will start automatically.
The appliance is preparing for shut-
down and the cooling phase has
not finished yet.
The appliance is OFF and all engines
are deactivated.
START
OPERATING
ECO
BRAZIER CLEANING
ACTIVE CLEANER
FINAL CLEANING
OFF
WAITING FOR
FLAME
FLAME PHASE
RESTART
PHASE
DESCRIPTION
Room temperature set on MAN
mode. In this case the appliance will
operate only when firebox power is
set (it NEVER switches to eco mode).
Room temperature control by an
external thermostat (not supplied by
the manufacturer) has been cho-
sen.
When Comfort Clima is active, the
product will shut down automatical-
ly as soon as all setting values are
reached.
(see specific paragraph)
.
The appliance optimizes combu
-
stion by reducing the pellet load,
while still guaranteeing its perfor-
mance.
MAN OPERATION
15 FUNCTIONS OVERVIEW
ECO
THERMOSTAT
COMFORT CLIMA
OPTIMA FLAME
16 ALERTS OVERVIEW
PHASE
DESCRIPTION
The appliance is in alarm status.
Please check the “ALARMS”
chapter for more information.
The appliance reports an anomaly
without shutting down. See “17
ANOMALIES OVERVIEW”.
Batteries in the
remote control
have a low
level of energy.
The set threshold of running hours
has been reached. We recom-
mend to request an extraordinary
maintenance service by authorized
personnel.
Forced shutdown when H
2
O
temperature reaches 85 °C. The
product restarts automatically if re-
start conditions occur.
ALARM
ANOMALY
BATTERY 10%
LOW BATTERY
HRS SERVICE
H
2
0 STANDBY