NKT Photonics Koheras BOOSTIK, Руководство по эксплуатации продукта

Страница: 39 / 68

39
Status panel
Device monitor
The Device Monitor provides a real-time display of communication port
parameters and any connected device modules.
The parameter values displayed are continuously updated and can be used to
help debug issues with connected devices. The parameters are listed and
described in
Table 5 .
Table 5 Device Monitor parameters
Parameter Description
Interface The PC port interface the device(s) is connected to. Click the greater
than symbol to the left of the port to display the connected device (s)
parameters.
TxTlgsSec The number of telegrams per second being transmitted to the
connected device.
RxTlgsSec The number of telegrams per received from the connected device.
Addr The address of the connected module.
Type The type of the connected module read from the module.
SysType The system type, default 0 – can be used to describe system variants
and is read from the module.
Name The name of the connected device module.
P/N The device module part number.
Mode The mode or status of the connected module: connected,
disconnected, or disabled
Status bits The actual status bits read from the connected module.
Error code The actual error code read from the connected module.
Access Protected/Locked status of the module.
FW Ver. The device module’s firmware release date.
Module Serial The serial number of the device module
PCB Serial The device module’s printed circuit board serial number
PCB Ver, The version of the device module’s printed circuit board.
Sp. Cap/ The module speed capability in bits per second as read from the
module – Values: 0=(default) 115200, 1=230400, 2=460800, 3=921600
Pri Ext Primary extension/GUI loaded for this module. Hover over the icon to
list more details – Note that there can only be 1 primary.
Fast Log 0%-100% collected. Note only if the module has a fast log and only
internal modules have fast and slow logs.
Slow Log 0%-100% collected. Note only if the module has a slow log.
Mainboard Log 0%-100% collected. Note only if the module has a main log. Only main
boards have a main and system logs.
System Log 0%-100% collected. Note only if the module has a system log. Only main
boards have a main and system logs.
Timeout Time in milliseconds since the last telegram was received from the
device module.
Nack Total number of negative acknowledgments received from the device
module.