NKT Photonics Koheras BOOSTIK, Руководство по эксплуатации продукта

Страница: 23 / 68

23
2 Installation
Safety
Warning: A Koheras BOOSTIK is a Class 3b or Class 4 laser and exposure to its emis-
sion is hazardous. Follow all regional laser safety regulations regarding installation,
operation, and otherwise. Ensure to verify with your Laser Safety Officer (LSO) that the
installation follows all applicable safety regulations and do no operate the laser until
the officer approves it.
Passive cooling
A BOOSTIK module generates a substantial amount of heat that must be dissipated.
The module uses a passive cooling design to dissipate the heat. To facilitate passive
cooling, the module is mounted so either the rear or left panel is in firm contact with a
heat conductive material with an efficient thermal path.
Caution: For reliable operation, the BOOSTIK should not be exposed to corrosive
agents or excessive moisture, heat or dust.
Caution: Table 11 in Appendix A lists the specifications for the BOOSTIK operating en-
vironment.
Rear panel surface
The rear panel surface shown in Figure 7 acts as passive heat conductor for the
module. Using this surface, the module is mounted so that the surface is in contact
with a heat conductive material and path to for example, cooling fins. When the
module is inserted into an ACOUSTIK shelf, the rear panel surface is firmly fitted to
heat conductive metal foil lining the rear backplane of the shelf. This facilitates heat
transfer to the cooling fins mounted on the rear of the ACOUSTIK.
Figure 7 Rear panel heat conduction surface s
Caution: For proper operation and to prevent equipment damage, a Koheras
ACOUSTIK shelf can support a maximum of two Koheras BOOSTIK modules inserted
into specific shelfs slots. Ensure to follow all installation instructions noted in the
Ko-
heras ACOUSTIK Product Guide .