NKT Photonics Koheras BOOSTIK, Руководство по эксплуатации продукта

Страница: 25 / 68

25
Passive cooling
Custom mounting
For a simple custom system, the BOOSTIK module can be placed on a level and
stable surface such as an optical table. The module can be bolted for example, to the
table using a custom mounting bracket (not included) attached to the side of the
module as shown in
Figure 10 . The bracket and table material should provide a
thermal path to dissipate the heat generated by the BOOSTIK. Any custom
installation must adhere to the rules list below in section:
“Custom installation rules” .
Figure 10 Example custom mount installation on a standard optical table
Custom installation
rules
•
Allow for proper ventilation and cable access.
•
Do not store or place anything on the top panel of the amplifier.
•
Ensure the ambient operating temperature and humidity is stable as stated in the
Table 11 on page 53 .
•
Avoid placing the amplifier near sources that could cause temperature
fluctuations.
•
The surface the amplifier is placed on, must be free of vibration or mechanical
shocks.
•
Ensure to provide a thermal cooling path from either the rear or side panel.
•
Do not bend the fibers below a bend radius of 10 cm.
•
The amplifier is a Class 4 laser and as such the installation area must follow all
regional laser safety regulations as defined by the assigned Laser Safety Officer
(LSO).
M6 screw
M6 screw
M3 screws