User manual – Glass Clock Design #3
rev 1.2
5.7.2
Setting the OFF time
The OFF time setting is indicated by the leftmost colon on.
Setting the display OFF time is accomplished by using both the mode
button and the function button.
The hours digits will be flashing on and off once a second. The black
function button will change the hour value. Holding the function
button on will quickly cycle through the hours (0-23). Note: When
setting the hours, 24 hour mode is used, regardless of the hour format
setting (12/24 hour display mode). This means '00' is 12 AM
(midnight), and '13' is 1 PM (afternoon).
Once the hours are set correctly, press the red mode button to change
to the minute value. When the mode button is momentarily pressed,
the minutes digits will flash on and off once a second. The black
function button will change the minute value. Holding the function
button on will quickly cycle through the minutes (0-59).
After the minutes are set correctly, momentarily press the red mode
button. At this point, all the digits (Hours:Minutes:Seconds) will flash
once a second. Pressing the mode button again will update the OFF
time to the new settings.
To cancel setting the OFF time value at any point, press and hold the
red mode button until the display goes blank. This will cancel setting
the OFF time. When the mode button is released, the clock will go
back to the normal display.
After the OFF time is set, the ON time is set next.
Page 21 of 27