User manual – Glass Clock Design #3
rev 1.2
5.4.1
Setting the date – month
At this point, the month number (2 leftmost digits) will be blinking.
Use the function button to change the month value ('01' = January,
'12' = December, etc).
Once the month value is set to the proper value, press the red mode
button momentarily. The clock will then go to the day set mode.
Note: If using the alternate date format (dd mm yy), the day will be
shown, followed by the month value).
5.4.2
Setting the date – day
At this point, the day number (2 middle digits) will be blinking. Use
the black function button (left side) to change the day value (01 – 31).
Once the day value is set to the proper value, press the red mode
button momentarily. The clock will then go to the year set mode.
Note: If using the alternate date format (dd mm yy), the day will be
shown, followed by the month value).
5.4.3
Setting the date - year
At this point, the year number (2 rightmost digits) will be blinking.
Use the function button to change the year value ('10' = 2010, '99' =
2099, etc).
Once the year value is set to the proper value, press the red mode
button (right side) momentarily. At this point the date is set and the
clock will go back to the normal display mode.
Page 11 of 27
