User manual – Glass Clock Design #3
rev 1.2
5.6 Changing clock options
There are several clock and display options available that can be changed
by the user. When changed, these options will be saved to permanent
memory. They will be saved even if the power is off for an extended period
of time.
Enter the options mode by pressing and holding the black function button
(left side) until the display goes blank. After releasing the function button,
the 2 leftmost digits will flash with '12' or '24' value, (starts with option 1).
Each option is displayed one after another (by pressing the red mode
button), starting with option 1 and ending with option 6.
Table of clock options
Option 1
12/24 hour mode
Option 2
Date format option: mm-dd-yy or dd-mm-
yy
Option 3
Display option, time/date/temperature, digit
cross fade
Option 4
Temperature units, F or C
Option 5
Brightness level, auto or fixed brightness
Option 6
Anti-cathode poisoning mode start time
5.6.1
Option 1 – 12/24 hour mode
This option selects the hour style displayed. 12 hour style is 1:00 →
12:00 AM/PM. 24 hour style is 0:00 → 23:00.
A blinking '12' or '24' will be displayed in the 2 leftmost digits,
indicating the hour style. To change the style, press the black function
button (left side). Press the red mode button (right side) when the
desired hour style is displayed. Then the next option will be
displayed.
To cancel the option mode, press and hold the red mode button until
the display goes blank. Release the mode button and the clock will go
back to normal operation, aborting setting option 1.
Page 14 of 27